Great Planes Cirrus SR22 Turbo ARF - GPMA1166 - Manual (Page 15)

15
❏
3. Cut pieces from the hook side of the included self-
adhesive hook and loop material and attach them to the
battery tray. Make a battery strap from the included non-
adhesive hook and loop material by overlapping the material
by approximately 1" [25mm]. Cut the strap to properly fi t your
battery and insert it through the slots in the battery tray.
❏
4. Apply the loop side to the battery and test fi t it into the
fuselage.
❏
5. Install the included prop adapter onto the motor shaft.
Be sure it is pressed on as far as it will fi t onto the shaft.
❏
6. Install the spinner backplate, propeller, prop washer, and
prop nut. Enlarge the slots in the spinner cone as necessary
to fi t your propeller. When satisfi ed, install the spinner cone
to the spinner backplate using the included screws.
❏
7. Apply the instrument panel decal to the cockpit interior.
❏
8. If you plan to install a pilot fi gure, install him now
before gluing the cockpit interior to the canopy hatch. We
used a Williams Bros. 1/8 Sportsman pilot, stock number