Clarion VMA6593 - Manual (Page 4)

4 VMA6593
Front-Panel Controls
6.5 INCH WIDE LCD MONITOR
POWER
(+) and (-)
adjustment keys
IR
receiver
PICTURE
WIDE
SOURCE
The [POWER] button turns the VMA6593 on and off.
Notes:
• Even after the VMA6593 is switched on, the screen remains dark
until a video signal is detected.
• When the ignition switch is turned off, the VMA6593 automatically
shuts off. The next time the ignition switch is turned on, the
VMA6593 will remain off until the [POWER] button is pressed.
The [SOURCE] button selects between the two video inputs of
the VMA6593.
Note:
• If only one of the video inputs is used, the screen will remain dark
when the unused input is selected.
The [WIDE] button changes the display mode from “wide”
16:9 mode to “normal” 4:3 mode.
4:3 16:9
Note:
• When using a DVD player as the source unit, make sure that the
DVD player’s output mode is set to “Wide” or “16:9”, so that it will
generate a video signal that can take advantage of the
VMA6593’s aspect ratio. When using this display with sources
that generate a “normal”, 4:3 image signal, such as videogames
and videocassette players, the [WIDE] button will “stretch” the
image to fit the screen. In this case, some minor image distortion
may be visible.
VMA 6593 122302.p65 12/23/02, 10:34 PM 4