Great Planes F6F Hellcat EP Park Flyer ARF - GPMA1159 - Manual (Page 12)

❏
1. Attach the cowling to the fuselage. Add a very small
drop of thin foam safe CA to each side of the fuselage where
the cowl slides on. This will help hold it on while in the air,
but also allow it to come off later for access to the motor.
❏
2. Slide the prop and prop adapter onto the gearbox
shaft. Install the prop washer with the flange forward.
Tighten the prop adapter nut to secure it to the shaft.
❏
3. Snap the nose cone onto the prop adapter.
❏
1. Connect the aileron servo lead to the extension
coming from the fuselage. Slide the wing in place slowly
while feeding the wires back into the fuselage.
❏
2. Align the wing LE with the holes in the fuselage former
and slide it into place.
❏
3. Secure the wing to
the fuselage using the
3 x 20mm wood screw.
Do not overtighten!
Main Wing Installation
Propeller Installation
FINAL PREPARATIONS
12