Great Planes Fling 2m Sailplane ARF - GPMA1062 - Manual (Page 4)

Here is a list of optional tools mentioned in the manual that
will help you build the Fling 2M ARF.
❏
Great Planes Plan Protector ™ (GPMR6167) or wax paper
❏
Great Planes 2 oz. [57 g] Spray CA activator (GPMR6035)
❏
Great Planes mixing cups (GPMR8056)
❏
Great Planes epoxy brushes (6, GPMR8060)
❏
Hobbico builder’s triangle set (HCAR0480)
❏
Great Planes Threadlocker ™ thread-locking
cement (GPMR6060)
❏
Denatured alcohol (for epoxy clean up)
❏
Top Flite ® Panel Line Pen (TOPQ2510)
❏
Hobbico Z-bend pliers (HCAR2000)
❏
Great Planes AccuThrow ™ deflection gauge (GPMR2405)
❏
Great Planes CG Machine ™ (GPMR2400)
• Whenever just epoxy is specified you may use either
30-minute (or 45-minute) epoxy or 6-minute epoxy. When
30-minute epoxy is specified it is highly recommended that
you use only 30-minute (or 45-minute) epoxy, because you
will need the working time and/or the additional strength.
• Photos and sketches are placed before the step they
refer to. Frequently you can study photos in following steps
to get another view of the same parts.
• The stabilizer and wing incidences have been factory-
built into this model. However, some technically-minded
modelers may wish to check these measurements anyway.
To view this information visit the web site at
www.greatplanes.com and click on “Technical Data.” Due
to manufacturing tolerances which will have little or no effect
on the way your model will fly, please expect slight
deviations between your model and the published values.
Replacement parts for the Great Planes Fling 2M ARF are
available using the order numbers in the Replacement Parts
List that follows. The fastest, most economical service can be
provided by your hobby dealer or mail-order company.
To locate a hobby dealer, visit the Hobbico web site at
www.hobbico.com. Choose “Where to Buy” at the bottom
of the menu on the left side of the page. Follow the
instructions provided on the page to locate a U.S., Canadian
or International dealer.
Parts may also be ordered directly from Hobby Services by
calling (217) 398-0007, or via facsimile at (217) 398-7721,
but full retail prices and shipping and handling charges will
apply. Illinois and Nevada residents will also be charged
sales tax. If ordering via fax, include a Visa
® or MasterCard ®
number and expiration date for payment.
Mail parts orders and payments by personal check to:
Hobby Services
3002 N. Apollo Drive, Suite 1
Champaign, IL 61822
Be certain to specify the order number exactly as listed in
the Replacement Parts List. Payment by credit card or
personal check only; no C.O.D.
If additional assistance is required for any reason contact Product
Support by e-mail at [email protected], or by
telephone at (217) 398-8970.
Replacement Parts List
Order Number Description How to Purchase
Missing pieces Contact Product Support
Instruction manual Contact Product Support
Full-size plans Not available
GPMA2715 Wing Set Contact Hobby Supplier
GPMA2716 Fuselage Contact Hobby Supplier
GPMA2717 Tail Set Contact Hobby Supplier
GPMA2718 Canopy Contact Hobby Supplier
GPMA2719 Decal Sheet Contact Hobby Supplier
Fuse = Fuselage
Stab = Horizontal Stabilizer
Fin = Vertical Fin
LE = Leading Edge
TE = Trailing Edge
LG = Landing Gear
Ply = Plywood
" = Inches
mm = Millimeters
SHCS = Socket Head Cap Screw
1" = 25.4 mm (conversion factor)
METRIC CONVERSIONS
COMMON ABBREVIATIONS
ORDERING REPLACEMENT PARTS
IMPORTANT BUILDING NOTES
Optional Supplies and Tools
4
1/64" = .4 mm
1/32" = .8 mm
1/16" = 1.6 mm
3/32" = 2.4 mm
1/8" = 3.2 mm
5/32" = 4.0 mm
3/16" = 4.8 mm
1/4" = 6.4 mm
3/8" = 9.5 mm
1/2" = 12.7 mm
5/8" = 15.9 mm
3/4" = 19.0 mm
1" = 25.4 mm
2" = 50.8 mm
3" = 76.2 mm
6" = 152.4 mm
12" = 304.8 mm
18" = 457.2 mm
21" = 533.4 mm
24" = 609.6 mm
30" = 762.0 mm
36" = 914.4 mm