Great Planes Giles G-202 ARF - GPMA1315 - Manual (Page 4)

❏
Electrical Tape or Heat Shrink Tubing
❏
Hobby Heat ™ Micro Torch (HCAR0750)
❏
Razor Saw
❏
Petroleum Jelly
❏
4" White Spinner
❏
CA Applicator Tips (HCAR3780)
❏
Epoxy Brushes (GPMR8060)
❏
Epoxy Mixing Sticks (GPMR8055, Qty. 50)
❏
CA Debonder (GPMR6039)
❏
Dremel ® Moto-Tool ™ or Similar with Cut-Off Wheel
❏
Hot Sock ™ (TOPR2175)
❏
Dead Center ™ Engine Mount Hole Locator
(GPMR8130)
❏
Curved Tip Canopy Scissors for Canopy Trimming
(HCAR0667)
❏
Switch and Charge Jack (GPMM1000)
❏
Sealing Iron (TOPR2100)
❏
Household Oil
❏
6 oz. Segmented Lead Weight (GPMQ4485)
❏
C.G. Machine ™ (GPMR2400)
❏
Power Point ® Balancer (TOPQ5700)
❏
Fingertip Prop Balancer (GPMQ5000)
❏
Fueling System (Great Planes Top Fueler ™ ,
GPMQ4160)
1. Closely inspect the fuselage, wing panels, rudder
assembly and stabilizer assembly for damage. If you find
any damage, contact the place of purchase, or Hobby
Services at Great Planes for a replacement.
2. Eliminate any wrinkles you find in the covering by
shrinking them away with a heat gun, then apply pressure to
the area with a covering iron and a hot sock. This will
securely bond the covering to the wood so the wrinkles will
be less likely to reappear in the future. Caution: Be careful
while working around areas where the colors overlap.
General Inspection
Optional Supplies & Tools
4
0" 1" 2" 3" 4" 5" 6" 7"
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180
Inch Scale
Metric Scale