Great Planes Matt Chapman Eagle 580 ARF 1/3 Scale - GPMA1286 - Manual (Page 6)

6
ASSEMBLE THE STAB
Prepare the Servo Arms
Note: The included aluminum servo arms are designed with
plastic inserts, allowing the arms to work with all current
Futaba, Hitec, Airtronics and JR servos . The inserts are also
designed so that the centering of the arm can be adjusted by
rotating the insert and then re-attaching the arm .
o 1 . Drill and tap 4-40 threads in the two outermost holes of
each of the six single-sided servo arms .
o 2 . The nylon ball links have a number on one side of them .
With the number facing up, press the brass ball into each of
the nylon balls link from the bottom, opposite the number .
KIT CONTENTS
1 . Cowl
2 . Fuselage
3 . Canopy/Hatch
4 . Aluminum Spinner 5 . Main Gear
6 . Wheels
7 . Wheel Pants
8 . Stab and Elevators 9 . Stab Tubes
10 . Rudder
11 . Wings and Ailerons
12 . Wing Tube
1
2
3
4 5
6 7
8
9
10
11 11
12