Great Planes P-40 Warhawk GP/EP ARF - GPMA1472 - Manual (Page 23)

23
❏
5. Attach the canopy to the fuse with R/C 56 canopy
glue. Use masking tape to hold the canopy in place while the
glue dries.
❏
6 Install your propeller and the included spinner onto the
motor shaft. Prepare the model for balancing by installing the
wing using two 3mm x 25mm Phillips machine screws and
two 3mm fl at washers.
Optional Landing Gear
The P-40 Warhawk ARF includes optional landing gear
for those modelers who choose to sport fl y the model and
would benefi t from using landing gear. The included landing
gear is recommended for paved runways only. If you plan
to fl y the P-40 Warhawk ARF in combat competition, we
suggest omitting the gear for reduced weight and increased
maneuverability.
❏
1. Locate and remove the covering from the landing gear
slots on the underside of the wing.
❏
2. Using four 3mm wheel collars and four 3mm set screws,
temporarily install the wheels onto the landing gear, centering
them on the axles. Tighten the set screws against the axles.