Great Planes Pitts Special 1/3 Scale ARF MonoKote - GPMA1218 User Manual
Page 6
(1) PAINTED CANOPY
(1) DECAL SHEET
(1) PAINTED ALUMINUM LANDING GEAR
(1) ALUMINUM SPINNER
(1) PLYWOOD TRAY
(for optional mounting receiver and battery pack)
(4) 8/32" x 1" SHCS
(socket-head cap screws for attaching engine mount)
(4) 8/32" BLIND NUTS (for attaching engine mount)
(4) 6/32" x 1/8" SET SCREWS (for wheel collars)
(4) 5/32" WHEEL COLLARS (for attaching main wheels)
(2) 2" x 5/32" AXLES
(2) 5/16" LOCK NUTS (for attaching axles)
(2) ¼"-20 NYLON BOLTS (attach wing to fuse)
(1) NYLON CLEVIS (throttle)
(7) 4-40 SOLDER CLEVISES (ailerons, elevators, rudder servos)
(1) 2-56 NYLON FASLINKS (throttle)
(7) HEAVY DUTY CONTROL HORNS
(ailerons, elevators, rudder)
(3) HEAVY DUTY CONTROL HORN BACK-PLATES
(elevators and rudder)
(40) SILICONE CLEVIS RETAINERS (all clevis applications)
(1) 2" x 9" CA HINGE STRIP (all control surfaces)
(2) 2-56 x 12" THREADED ONE END ROD
(throttle and tail wheel control rod)
(7) 4-40 x 12" THREADED ONE END ROD
(control surfaces push rods)
(8) #8 WASHERS
(engine mount to firewall and engine to mount)
(13) 4-40 NYLON STOP NUTS (for attaching struts,
cabanes, and brackets for tail surface flying wires)
(10) #4 WASHERS (for attaching struts and cabanes)
(6) #2 x 1/2" PHILLIPS HEAD SCREWS
(for attaching cowl)
(4) 8-32 x ¾" SOCKET HEAD SCREWS
(for mounting engine to mount)
(12) #2 FLAT WASHER
(for attaching landing gear spats and attaching cowl)
(7) 4-40 x 5/8" PHILLIPS HEAD MACHINE SCREWS
(for attaching wheel pants and brackets for tail surface
flying wires)
(25) 2-56 THREADED METAL CLEVISES
(for flying wires, (1) tail gear linkage)
(25) 2-56 NUTS
(for flying wires and tail wheel steering pushrod)
6
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
Key #
Description
Qty
1.
FIN with/ RUDDER ..........................................(1)
2.
TOP WING CENTER SECTION......................(1)
3.
BOTTOM WING with/AILERONS .............(2 Pcs)
4.
TOP WING with/AILERONS .....................(2 Pcs)
5.
LANDING GEAR SPATS ................................(2)
6.
PAINTED FIBERGLASS STRUTS .................(2)
7.
PAINTED FIBERGLASS WHEEL PANTS ......(2)
8.
4” WHEELS ....................................................(2)
Key #
Description
Qty
9.
FUSELAGE .....................................................(1)
10.
STAB with/ELEVATORS ..................................(1)
11.
FUEL TANK W/HARDWARE ...........................(1)
12.
PAINTED FIBERGLASS COWL ......................(1)
13.
ENGINE MOUNT L&R .............................(2 Pcs)
14.
PAINTED CABANE STRUTS .........................(2)
15.
WING JOINERS ....................................(10 Pcs)
Parts photographed
Kit Contents
Parts not photographed