Additional items required battery charger, Adhesives and building supplies, Optional supplies – Great Planes Rifle Sport/Racer EP ARF - GPMA1805 User Manual

Page 4: Kit inspection, Kit contents

Advertising
background image

4

ADDITIONAL ITEMS REQUIRED

Battery Charger

A LiPo-capable battery charger and a power source for

the charger is required. One recommended charger is
the Great Planes ElectriFly TritonEQ

AC/DC Charger

(GPMM3155). The TritonEQ can be powered either by

an AC or DC power source and features a built-in LiPo
cell balancer.

Another suitable LiPo battery charger is the Great Planes

PolyCharge4

DC LiPo charger (GPMM3015). The

PolyCharge4 can charge up to four LiPo batteries at the
same time, but requires separate LiPo cell balancers, so
for each LiPo battery you wish to charge simultaneously

(up to 4), one Great Planes Equinox

LiPo Cell Balancer

(GPMM3160) will be required. The Equinox comes with

2S and 3S charge adapters, so these will be suitable for
the batteries recommended for your Rifl e. Finally, the
PolyCharge4 does not have AC capability, so if wall-
charging from home is a priority a separate A/C 12-Volt
power source must also be purchased. A suitable power
supply then for the PolyCharge4 is the Great Planes 12V

12A DC power supply (GPMP0901).

Adhesives and Building Supplies

Other than common hobby tools this is the list of adhesives
and building supplies that are required to fi nish the Rifl e.

1/2 oz. [15g] Thin Pro

CA (GPMR6001)

CA applicator tips (HCAR3780)

2 oz. [59mL] spray CA activator (GPMR6035)

Threadlocker thread locking cement (GPMR6060)

Stick-on segmented lead weights (GPMQ4485)

1/16" [1.6mm] drill

Optional Supplies

Du-Bro

®

double-sided tape (DUBQ3551—for

mounting ESC, receiver)

Shoe Goo

(DTXC2460—for securing servo wires)

Great Planes Velcro

®

(GPMQ4480—for additional

batteries)

KIT INSPECTION

Before starting to build, take an inventory of this kit to make
sure it is complete, and inspect the parts to make sure they
are of acceptable quality. If any parts are missing or are not of
acceptable quality, or if you need assistance with assembly,
contact Product Support. When reporting defective or
missing parts, use the part names exactly as they are written
in the Kit Contents list.

Great Planes

Ph: (217) 398-8970, ext. 5

Product Support

Fax: (217) 398-7721

3002 N Apollo Drive, Suite 1
Champaign, IL 61822

E-mail: [email protected]

KIT CONTENTS

1. Fuselage

2. Wing

3. Elevator

pushrod

4. Horizontal

stabilizer

5. Spinner

(cone, back plate, shaft,

washer, nut, spare shaft)

6. Balancing

stand

7. Adhesive-back

hook & loop material

8. Elevator servo mount

9. Landing skids

10. Aileron pushrods

11. Antenna guide tube

1

6

2

4

9

10

11

8

7

3

5

Advertising