Great Planes Seawind .60-.91 ARF - GPMA1360 - Manual (Page 27)

Great Planes Ultimate Biplane ARF
The Ultimate Bipe 1.60 ARF’s polished look comes from
precision-fitting parts made of select woods, surrounded by
MonoKote covering and topped off with a painted fiberglass
cowl and wheel pants. You’ll have it assembled and ready for
flight in about 20 hours. The lightweight construction –
achieved in part through strategic use of lightening holes –
provides an excellent power-to-weight ratio for outstanding
3D performance.
Individual servos for each of the four
ailerons supply maximum maneuvering muscle. Airfoil-
shaped landing gear resists spreading even under this
IMAA/IMAC-legal model’s weight. GPMA1307
Great Planes Little Toni ARF
A fierce competitor for decades, the Little Toni is the
inspiration for this exciting ARF model. The wing halves and
tail surfaces are balsa-sheeted, built-up – and factory-
covered in genuine MonoKote. The fiberglass fuselage,
cowl, wheel pants and aluminum landing gear arrive painted
to match. A clear canopy, scale shaped aluminum spinner,
decals and Great Planes hardware are also supplied. In as
little as 12-15 hours, the Little Toni can be turning heads at
the field. And she flies as great as she looks – tracking
solidly, turning quickly, and slowing gently for smooth, easy
landings. Capable of most all aerobatic maneuvers, a .91-
equipped Little Toni is most at home rocketing around
pylons at breathtaking speeds! GPMA1320
Great Planes Lancair ES .60 ARF
The original Lancairs were high-performance homebuilts.
Great Planes’ version is high-performance too, but it’s also
factory-built for ease. A painted fiberglass fuselage and
wings covered in MonoKote offer speedy assembly and
spectacular looks. Upswept wing tips, installed windows,
molded-in panel lines and painted fiberglass fairings and
wheel pants add realistic detail. An aluminum spar joins the
stabs, speeding installation and removal. Performance
makes it as ideal for the eager intermediate as the time-
pressed pro. Ask for speed, and it hustles. Ask for agility,
and dual aileron servos deliver. Ask for easy landings, and
dual flap servos slow you for soft touchdowns on wide-
stance, ES-style trike gear. GPMA1347
O.S. Engines ® FS-91 Surpass ™ II
It’s the power that lasts! CAD-assisted engineering and
CNC-machined parts ensure the FS-91 Surpass II’s fit and
finish; a permanently lubricated, rubber-sealed rear bearing
and corrosion-resistant plating on the crankshaft, camshaft
and piston help minimize wear and maximize performance.
Bolt in this powerhouse, and a large-scale plane can go
from a short roll–out to rocketing vertical to out-of-sight in
the span of a few seconds. And along with the power you’ll
enjoy improved fuel economy and a mellower, more scale-
like sound. The needle valve and mixture control screw are
on the same side of a reversible carb to offer maximum
installation and access ease. OSMG0896
27