Great Planes Super Decathlon 40 Kit - GPMA0185 - Manual (Page 41)

NOTES
Date Purchased: Where Purchased:
Date Assembly Started: Date Assembly Finished:
Finished Ready To Fly Weight: 8 Digit Code on Box End:
General Notes:
PROCEDURE FOR CHECKING THE WING INCIDENCE
(See Page 24)
1. Block up the fuselage until the stabilizer (or stab
bed) is perfectly level (use a small bubble level).
2. With the fuselage level, use an incidence meter to
check the wing angle. The wing must be set at 1 degree
positive. Adjust the wing trailing edge up or down until this
reading is achieved. (If you do not have access to an
incidence meter, try setting the wing angle so the center of the
leading edge is 3/16" higher than the center of the trailing
edge)
41