Great Planes Tiger Moth 60 ARF - GPMA1330 - Manual (Page 6)

6
(4)8-32 x 1" SHCS (attaching engine mount)
(4) 8-32 Blind nuts (attaching engine mount)
(6) 6-32 x 1/8" Set screws (3/16" wheel collars)
(4) 3/16" Wheel collars (main wheels)
(1) 3/32" Wheel collar (tail wheel)
(1) Brass screw lock connector (throttle linkage)
(1) Nylon retainer (throttle linkage)
(1) 4-40 x 1/4” SHCS (throttle linkage)
(2) 1/4" - 20 Nylon bolts (attach wing to fuse)
(6) Nylon clevises (ailerons, elevators, rudder)
(4) Faslinks (ailerons, elevator, rudder servos)
(4) Nylon landing gear straps
(5) Nylon control horns (ailerons, elevs, rudder)
(26) Silicone clevis retainers (1) 2" x 9" CA hinge strip (all control surfaces)
(3) .074" x 36" Thread one end pushrod
(rudder, elev)
(2) .074" x 12" Thread one end pushrod (aileron)
(1) .074" x 17.5" Thread one end pushrod (throttle)
(1) 11-3/4” Pushrod Guide Tube (throttle)
(8) #8 Washers (engine mount)
(3) 36” Pushrod Guide Tube (pre-installed in fuse)
(12) 4-40 Nylon lock nut (struts & cabanes)
(12) #4 Washers (struts & cabanes)
(12) 4-40 x 3/4" SHCS (struts & cabanes)
(12) #2 x 1/2" Phillips head screws (LG straps
and aileron control horns)
(4) 8-32 x 3/4" SHCS (engine to mount)
(2) 5/32" Wheel collars (elevator pushrods)
(1) 4-40 x 1/8" Set screw (3/32" wheel collar)
(4) 2-56 x 5/8" Machine screw (elev cntl horns)
(20) 2-56 Metal clevises (flying wires)
(2) 2-56 x 3/4" SHC Screw (rud cntl horn)
(1) 2-1/4" Black Spinner
(2) 1/4" - 20 Blind nuts (pre-installed in wing
hold down plate)
(4) 4 x 18mm Wood screws (cabanes to fuse)
(18) 3 x 12mm Wood screws (brackets for
struts and wires)
(4) 2.5 x 8mm Wood screws (cowl to fuse)
(24) Aluminum crimp tubes (flying wires)
(12) 2-56 Threaded brass ends (flying wires)
Kit Contents (Not Photographed)
8
9
10
12 11
13
1
3
6
2
4
23
3
5
1
22
21
14
20
19
18
15
16
17
7
1. Top Wing
2. Top Wing Center Section
3. Bottom Wing w/Ailerons
4. Fuselage
5. Stabilizer w/ Elevators
6. Fin w/ Rudder
7. Painted Fiberglass Cowl
8. Landing Gear 9. 3-1/4" Wheels (2)
10. Cabane Struts (2)
11. Interplane Struts (4)
12. Stab Braces (2)
13. Landing Gear Covers (2)
14. Wing Joiners (9)
15. Tail Wheel Wire & Bearing
16. 1-1/4" Tail Wheel
17. Wind Screens (2)
18. Fuel Tank w/ Hardware
19. Engine Mount (R & L Halves)
20. Wing Bolt Mounting Plate
21. Flying Wire
22. Metal Brackets (24)
23. Decal Sheet
Kit Contents (Photographed)
Before starting to build, use the Kit Contents list to take an inventory of your kit to make sure it is complete, and inspect
the parts to make sure they are of acceptable quality. If any parts are missing or are not of acceptable quality, or if you
need assistance with assembly, contact Great Planes Product Support. When reporting defective or missing parts, use
the part names exactly as they are written in the Kit Contents list on this page.
Great Planes Product Support:
Phone: (217) 398-8970
Fax: (217) 398-7721
E-mail: [email protected]
KIT CONTENTS