Great Planes Ultimate 3D E-Performance ARF - GPMA1546 - Manual (Page 5)

IMPORTANT BUILDING NOTES
• When you see the term test fi t in the instructions, it means
that you should fi rst position the part on the assembly
without using any glue, then slightly modify or custom fi t
the part as necessary for the best fi t.
• Whenever the term glue is written you should rely upon
your experience to decide what type of glue to use. When
a specifi c type of adhesive works best for that step, the
instructions will make a recommendation.
• Whenever just epoxy is specifi ed you may use either 30-
minute (or 45-minute) epoxy or 6-minute epoxy. When 30-
minute epoxy is specifi ed it is highly recommended that
you use only 30-minute (or 45-minute) epoxy, because you
will need the working time and/or the additional strength.
• Photos and sketches are placed before the step they
refer to. Frequently you can study photos in following steps
to get another view of the same parts.
• The stabilizer and wing incidences and engine thrust angles
have been factory-built into this model. However, some
technically-minded modelers may wish to check these
measurements anyway. To view this information visit the web
site at www.greatplanes.com and click on “Technical Data.”
Due to manufacturing tolerances which will have little or no
effect on the way your model will fl y, please expect slight
deviations between your model and the published values.
ORDERING REPLACEMENT PARTS
Replacement parts for the Great Planes Ultimate Biplane EP
ARF are available using the order numbers in the Replacement
Parts List that follows. The fastest, most economical service
can be provided by your hobby dealer or mail-order company.
To locate a hobby dealer, visit the Great Planes web site
at www.greatplanes.com. Choose “Where to Buy” at the
bottom of the menu on the left side of the page. Follow the
instructions provided on the page to locate a U.S., Canadian
or International dealer.
Parts may also be ordered directly from Hobby Services by
calling (217) 398-0007, or via facsimile at (217) 398-7721,
but full retail prices and shipping and handling charges will
apply. Illinois and Nevada residents will also be charged
sales tax. If ordering via fax, include a Visa
® or MasterCard ®
number and expiration date for payment.
Mail parts orders and payments by personal check to:
Hobby Services
3002 N. Apollo Drive, Suite 1
Champaign, IL 61822
Be certain to specify the order number exactly as listed in
the Replacement Parts List. Payment by credit card or
personal check only; no C.O.D.
If additional assistance is required for any reason, contact
Product Support by telephone at (217) 398-8970, or by
e-mail at [email protected].
Replacement Parts List
Order Number Description How to Purchase
Missing pieces ............... Contact Product Support
Instruction manual .......... Contact Product Support
Full-size plans ................................... Not available
GPMA2970 ........... Fuselage ........................ Contact Product Support
GPMA2971 ........... Top Wing ........................ Contact Product Support
GPMA2972 ........... Bottom Wing ................... Contact Product Support
GPMA2973 ........... Tail Surfaces ................... Contact Product Support
GPMA2974 ........... Cowl ............................... Contact Product Support
GPMA2975 ........... Interplane Set ................. Contact Product Support
GPMA2976 ........... Cabane Set .................... Contact Product Support
GPMA2977 ........... Wheelpants .................... Contact Product Support
GPMA2978 ........... Landing Gear ................. Contact Product Support
GPMA2979 ........... Canopy ........................... Contact Product Support
GPMA2980 ........... Decal Sheet ................... Contact Product Support
GPMA2981 ........... Spinner ........................... Contact Product Support
GPMA2982 ........... Hardware Set ................. Contact Product Support
5