Ca6110d acoustic amplifier, Technical specifications – Crate Amplifiers CA6110D User Manual
Page 8
www.crateamps.com
©2004 SLM Electronics
A Division of St. Louis Music Co.
1400 Ferguson Avenue
St. Louis, MO 63133
47-941-04 • 021704
CA6110D Acoustic Amplifier
Technical Specifications:
Crate continually develops new products, as well as improves existing ones. For this reason,
the specifications and information in this manual are subject to change without notice.
Output Power Rating:
60 watts @ <1% THD
Channels 1 & 2: Low:
+/-15dB @ 80Hz
Mid:
+15, -30dBdB from 450Hz – 1.2kHz (Contour)
High:
+/-15dB @ 10kHz
Input Impedance:
3.3M ohm High-Z, 3k ohm Low-Z
Input Sensitivity:
5mV High-Z, 2mV Low-Z
Sens. to Eff Send/Line out:
6mV High-Z, 3mV Low-Z
Max Input Signal:
6V RMS (17V peak to peak)
CD Input: Input Impedance:
22k ohm
Input Sensitivity:
150mV
Max Input Signal:
6V RMS (17V peak to peak)
AuxEff. Return: Input Impedance:
11k ohm
Input Sensitivity:
60mV RMS
Max Input Signal:
6V RMS (17V peak to peak)
Eff Send Out. Impedance:
2.2k ohm
Line Out Out. Impedance:
220 ohm Low-Z, 2.2k ohm High-Z
Feedback Filters:
10Hz to 4.8kHz range, -15dB cut per filter
Internal Woofer:
10” w/polypropylene cone, rubber surround, 30.5oz magnet, 1.5” voice coil,
8 ohms, 75w RMS, 95dB 1w 1m
Internal Tweeter:
High efficiency Piezo, 110dB 1w 1m
Internal Crossover:
Passive type
Power Requirements:
120VAC, 60Hz, 70VA
100/115VAC, 50/60Hz, 70VA
230VAC, 50/60Hz, 70VA
Size and Weight:
17”H x 16”W x 14”D, 37 lbs.