Platinum – Haltech HT045666 User Manual
Page 3
Notes
PLATINUM
Sport 2000
GM Gen IV LS2 & LS3 Terminated Engine Harness
Quick Start Guide
Congratulations on purchasing a Haltech Engine Management Terminated Engine
Harness. This Plug and Play product allows you to be up and running in a few hours.
The Harness when installed in conjunction with a Haltech Platinum Sport 2000 opens
the door to virtually limitless performance modification and tuning of your vehicle.
Programmable systems allow you to extract all the performance from your engine by
delivering precisely the required amount of fuel and ignition timing that your engine
requires for maximum output under all operating conditions.
This quick start guide will walk you through installation of the Haltech GM LS2 & LS3
Terminated Engine Harness into a vehicle. This guide is accompanied by the full service
manual located on the software CD provided with the ECU that you or your tuner will
need to refer to before completing your installation and configuration. The Manual can
also be downloaded from the Haltech websit
Supported Engine
The Haltech GM GEN IV LS2 & LS3 Terminated Engine Harness supports the following
engine configurations:
•
General Motors - LS2 & LS3 with retro-fitted cable operated throttle body
Supported ECU
•
Haltech Platinum Sport 2000
Included in Haltech ECU Kit (HT051459)
•
Platinum Sport 2000 ECU
•
GM LS2 / LS3 Terminated Engine Harness with OEM EV6 Injector connectors
•
CAM Sensor Connector Pack
•
Deutsch Connector Pack
Optional Accessories ( Sold Separately )
•
Dual Channel Wideband Controller inc 2 Sensors and weld on bungs (HT010706)