Handling the unexpected, Smart entry remote battery strength, Jump starting – HONDA 2015 Civic (HF) - Owner's Guide (Revised 12/12/2014) User Manual

Page 55: Handling the, Unexpected, Smart entry remote battery strength jump starting

Advertising
background image

102 |

| 103

HANDLING THE UNEXPECTED

DRIVING

TABLE OF CONTENTS

INDEX

VISUAL INDEX

VOICE COMMAND

INDEX

SAFETY INFORMA

TION

CUSTOMER

INFORMA

TION

INSTRUMENT P

ANEL

SPECIFICA

TIONS

VEHICLE

CONTROLS

MAINTENANCE

AUDIO AND

CONNECTIVITY

HANDLING THE

UNEXPECTED

BLUETOOTH®

HANDSFREELINK®

DRIVING

NA
VIGA

TION

If a Fuel Leak Is Detected

If you smell natural gas or hear a hissing sound (except when refueling), the 

fuel system may have a leak. Turn off the manual shut-off valve immediately. You

should locate the valve before driving in case you need to turn it off quickly.

1. Park your vehicle outside in a well-ventilated area,

away from heat, sparks, and flame. Apply the

parking brake. Turn off the vehicle.

2. open all windows and the trunk for proper

ventilation.

3. Turn the manual shut-off valve one-quarter turn 

clockwise (as shown). The valve is turned to oFF.

4. Call a professional towing service (see page 106).

Do not continue driving. Have the vehicle towed to

an authorized Civic Natural Gas dealer.

Manual shut-off valve

HANDLING THE UNEXPECTED

Learn about what to do in critical or emergency situations.

Smart Entry Remote Battery Strength

If the battery life in your remote transmitter is weak, a message appears in the 

display with information on how to start the engine.

1. Touch the back of the remote transmitter to the 

ENGINE START/STOP button while the indicator is 

flashing.

2. With the brake pedal or clutch pedal pressed, 

press the ENGINE START/STOP button within 10 

seconds.

Jump Starting

Turn off the power to electric devices, such as audio and lights. Turn off the engine,

then open the hood.

1. Connect the first jumper cable to your vehicle’s 

battery (+) terminal.

2. Connect the other end of the first jumper cable 

to the booster battery (+) terminal. Use a 12-volt 

booster battery only.

3. Connect the second jumper cable to the booster 

battery (-) terminal.

4. Connect the other end of the second jumper cable 

to the grounding point as shown. Do not connect

this jumper cable to any other part.

5. If your vehicle is connected to another vehicle, 

start the assisting vehicle’s engine and increase its

rpm slightly.

6.  Attempt to start your vehicle’s engine. If it turns 

over slowly, make sure that the jumper cables have 

good metal-to-metal contact.

1.8 ℓ engine models

2.4 ℓ engine models

Booster battery

Booster battery

1.8 ℓ engine models

2.4 ℓ engine models

1.8 ℓ engine models

2.4 ℓ engine models

Advertising