Driving position memory system (dpms), One-touch turn signal, Reverse tilt door mirrors – HONDA 2015 Crosstour (EX-L with Navigation) - Technology Reference Guide User Manual

Page 7

Advertising
background image

10

11

How It Works

ONE-TOUCH TURN SIGNAL

Use this quick and convenient method to signal a lane change.

• Lightly push the turn signal lever up

or down for a three-blink sequence.

• For a continuous signal, push the

lever up or down until it locks into

place.

How It Works

DRIVING POSITION MEMORY SYSTEM (DPMS)

Store driver’s seat and outside mirror positions into memory for each corresponding

keyless remote transmitter (1 or 2).

1. Turn on the vehicle. Make sure the

shift lever is in Park (P).

3. Press SET. You will hear a beep.

2. Adjust the seat and outside

mirrors to your preferred position.

4. Press the memory button

corresponding to the remote

(1 or 2) you are using within 5

seconds. You will hear two beeps.

Note: Once set, stored positions can be recalled by pressing one of the memory

buttons (1 or 2) on the door.

REVERSE TILT DOOR MIRRORS

When you shift into Reverse (R), you can tilt either outside door mirror down slightly

to improve your view as you parallel park. Shifting out of Reverse returns the tilted

mirror to its original position.

How It Works

• To tilt the driver’s door

mirror, move the mirror

selector switch to the

left (L) position.

• To tilt the passenger’s

door mirror, move the

mirror selector switch

to the right (R)

position.

• To turn the feature off,

move the switch to the

middle position.

15 Crosstour TRG_EXL NAVI_AQS51528_ATG_NEW STYLE 8/5/2014 10:50 AM Page 7

Advertising