HONDA 2015 CR-V - Owner's Manual (Revised 12/15/2014) - Manual (Page 345)

344
uu Compass u Compass Zone Selection
Features
Compass Zone Selection
1. Turn the ignition switch to ON ( w .
2. Press and hold the SETUP button until the
display shows the compass setting menu.
3. Rotate to select Zone, then press .
The display shows the current zone
number.
4. Rotate to select the zone number of
your area (See Zone Map), then press .
1. Press the button.
2. Select Settings.
3. Select System.
4. Select Compass.
5. Select Zone.
6. Select the zone number of your area (See
Zone Map), then select OK.
Models with one display
Zone Number
Models with two displays
Zone Number
1 Compass Zone Selection
The zone selection is done to compensate the
variation between magnetic north and true north.
If the calibration starts while the audio system is in
use, the display returns to normal after the calibration
is completed.
15 CR-V-31T0A6300.book 344 ページ ２０１４年１２月１１日 木曜日 午後８時２０分