HONDA 2015 Pilot (Touring) - Technology Reference Guide - Manual (Page 15)

27 26
SONG BY VOICE TM (SBV)
Play songs from your iPod and HDD from most navigation/audio screens by using simple
voice commands.
Using the “Play” Command
Press and release the Talk button before you say a command.
1. Say “iPod search” or “HDD search.”
2. Say “Play” and one of the options on the
Search Mode screen. For example, say
“Play Artist XYZ” or “Play song XYZ.”
If an exact match is not found, the
system lists possible matches. Say the
number next to the selection you want
to play.
3. The system plays the selection and
returns to the Search Mode screen.
Using the “List” Command
Press and release the Talk button before you say a command.
1. Say “iPod search” or “HDD search.”
2. Say “List” and one of the options on the
Search Mode screen. For example, say
“List Artist XYZ.”
3. A list of tracks from the selected artist
is displayed. Say the number of the track
you want to play.
If an exact match is not found, the
system lists possible matches. Say the
number next to the selection you want
to play.
4. The system plays the selection and
returns to the Search Mode screen.
HOMELINK ®
Program your vehicle to operate up to three remote-controlled devices around your
home, such as garage doors, lighting, or home security systems.
Press and hold the button on the
remote and the HomeLink button at
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20
seconds?
Press and hold
the HomeLink
button again. Training
complete
YES NO
HomeLink indicator
flashes for 2 seconds,
then remains on. HomeLink LED
remains on. YES NO
YES NO
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program. 1
Press and hold the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
2
a
The remote has a rolling code.
Press the “learn” button on the
remote-controlled device (e.g.,
garage door opener).
Press the programmed HomeLink
button again; the remote-controlled
device should operate.
Within 30 seconds, press and
hold the programmed HomeLink
button for 2 seconds.
a
Press and hold the programmed
HomeLink button for about a
second.
Does the device (garage door opener) work?
3
b
4
5
Training a Button
If you have any problems programming HomeLink, see the owner’s manual included
with the device you are trying to program, call HomeLink at (800) 355-3515, or
visit www.homelink.com.
15 Pilot_Touring_KA_English_TRG_AQS51291_ATG_NEW STYLE 5/8/2014 12:54 PM Page 15