One-touch turn signal, Auto headlights with wiper integration – HONDA 1984 Accord Coupe (EX & EX-L) - Technology Reference Guide User Manual

Page 8

Advertising
background image

12

13

How It Works

ONE-TOUCH TURN SIGNAL

Use this quick and convenient method to signal a lane change.

• Lightly push the turn signal lever

up or down for a three-blink

sequence.

• For a continuous signal, push the

lever up or down until it locks

into place.

How It Works

DRIVING POSITION MEMORY SYSTEM (DPMS)

Store driver’s seat positions into memory for each corresponding keyless remote

transmitter (1 or 2).

Available

on

EX-L

V6

.

1. Turn on the vehicle. Make sure the

shift lever is in Park (P).

3. Press SET. You will hear a beep.

2. Adjust the seat to your preferred

position.

4. Press the memory button

corresponding to the remote

(1 or 2) you are using within 5

seconds. You will hear two beeps.

Note: Once set, stored positions can be recalled by pressing one of the

memory buttons (1 or 2) on the door.

How It Works

AUTO HEADLIGHTS WITH WIPER INTEGRATION

For your convenience, your vehicle’s headlights automatically turn on when the

windshield wipers operate.

Make sure your headlights are in

the AUTO position.

Turn on your windshield wipers.

The headlights also turn on.

When you turn off the windshield

wipers, the headlights turn off

shortly after.

14 Accord 2D TRG_EX-EXL_ATG_NEW STYLE 7/18/2013 8:54 AM Page 8

Advertising
This manual is related to the following products: