HONDA 2014 Accord Hybrid (EX-L) - Technology Reference Guide - Manual (Page 9)

Note: The driver’s and front passenger’s doors can be opened by pulling the inner
front door handle, regardless of the setting. Changing the setting to “All Doors” is
useful for unlocking the rear doors when a front door handle is pulled.
14 15
AUTO DOOR LOCKS
Door Locks
D e f a u l t L o c k S e t t i n g
The doors are preset to lock
when your vehicle reaches
about 10 mph.
D e f a u l t U n l o c k S e t t i n g
All doors are set to unlock when
the driver’s door is opened.
Changing Settings
Follow the steps below to change your door settings. Make sure you are using the
key you want to change the settings for (Driver 1 or Driver 2) and the vehicle is in
ON mode. See your Owner’s Manual for complete setting options.
Program how and when the vehicle doors automatically lock and unlock.
DRIVING POSITION MEMORY SYSTEM (DPMS)
Programming the DPMS
1. Turn on the vehicle. Make sure the
shift lever is in Park (P).
3. Press SET. You will hear a beep.
4. Press the memory button
corresponding to the remote
(1 or 2) you are using within 5
seconds. You will hear two beeps.
Note: Once set, stored positions can be recalled by pressing one of the
memory buttons (1 or 2) on the door.
Store driver’s seat positions into memory for each corresponding keyless remote
transmitter (1 or 2).
2. Adjust the seat to your preferred
position.
You can also change vehicle settings using the multi-
information display (see page 6) .
1. Press and hold DISP to go to
the Settings screen. Use the
selector knob to make and
enter selections.
2. Select Vehicle Settings.
3. Select Door/Window Setup.
4. Select Auto Door Lock or
Auto Door Unlock.
5. Select from the options.
6. Press BACK to exit the menu.
14 Accord Hybrid TRG_EXL_ATG_NEW STYLE 8/2/2013 9:38 AM Page 9