HONDA 1984 Civic CNG - Owner's Manual - Manual (Page 7)

Indicators
6
Instrument Panel
Indicator Name On/Blinking Explanation Message
Malfunction
Indicator Lamp
• Comes on when you turn the
ignition switch to ON II , and
goes off either when the engine
starts or after several seconds
if the engine did not start. If
"readiness codes" have not been
set, it blinks five times before it
goes off.
• Comes on if there is a problem
with the emissions control system.
• Comes on if there is a problem
with the fuel system.
• Blinks when a misfire in the
engine's cylinders is detected.
• Readiness codes are part of the on
board diagnostics for the emissions
control systems.
  Testing of Readiness Codes - refer
to your Owner's Manual Information
Section
• Comes on while driving - Have
your vehicle checked by an authorized
Honda Civic Natural Gas dealer as soon
as possible.
• Blinks while driving - Stop in a safe
place where there are no flammable
objects. Stop the engine for 10 minutes
or more, and wait for it to cool down.
Then, take the vehicle to a dealer.
  If the Malfunction Indicator Lamp
Comes On or Blinks P.38
Shift Lever
Position
Indicator
• Indicates the current shift lever
position.
  Shifting P. 14 —
Indicator
2014 Civic CNG
IP
Home