HONDA 2014 Crosstour (EX) - Technology Reference Guide - Manual (Page 5)

6 7
AUTO DOOR LOCKS
Programming the Auto Door Unlock Setting
1. Close the driver’s door. Shift into
Park.
2. Turn the ignition switch to ON (II). 4. Within 5 seconds, turn the ignition
switch to LOCK (0).
3. Press and hold the unlock side of the
master lock switch for about 10
seconds. In that time, you will hear
three clicks.
Follow the below steps to program all doors to unlock when you shift to Park. See your
Owner’s Manual for other setting options.
Door Locks
D e f a u l t L o c k S e t t i n g
The doors are preset to lock when
your vehicle reaches about 10 mph.
D e f a u l t U n l o c k S e t t i n g
Only the driver’s door is preset to
unlock when you shift into Park (P).
Note: The driver’s and front passenger’s doors can be opened by pulling the inner front door
handle, regardless of the setting. Changing the setting to “All Doors” is useful for unlocking the
rear doors when either inner front door handle is pulled.
Program how and when the vehicle doors automatically lock and unlock.
FUEL FILL DOOR
Opening the Fuel Fill Door
When you unlock the driver’s door,
the fuel door unlocks.
To open, push and release the fuel
door in the area shown until it
pops open.
Closing the Fuel Fill Door
Push the fuel door until it is flush
with the body.
Easy-to-use locking fuel door keeps your fuel cap secure.
When you lock the driver’s door,
the fuel door locks.
Note: If you lock the doors while the
fuel door is open, you must unlock the
doors to close the fuel door.
14 Crosstour TRG_EX_ATG_NEW STYLE 8/29/2013 1:24 PM Page 5