HONDA 2014 CR-V - Navigation Manual - Manual (Page 116)

115
 Audio System  System Theft Protection
Au
dio
System Theft Protection
The system is disabled when it is disconnected from the power source, such as when
the battery is disconnected or goes dead.
■ Reactivating the system
1. Turn the ignition switch to ON (II), and turn on the system.
 If you turn the ignition switch to ACCESSORY (I), you will be requested to enter
the security code. See step 3.
2. Press and hold the VOL 9 (Volume/Power) button again for more than two
seconds.
 The system is reactivated when the system’s control unit recognizes that the
system is in your vehicle.
 If the control unit fails to recognize, “ENTER CODE” appears on the navigation
screen.
3. Enter the security code. If you do not enter the code correctly after 10 tries, leave
the system for one hour before trying again, or visit a dealer to have the system
reset.
1 System Theft Protection
Find the audio system’s security code and serial
number label in your Owner’s Manual kit.
Do not store the label in your vehicle. If you lose
the label, you must first retrieve the serial
number, and then obtain the code from a dealer.
U.S. Only
You can register the security code at
Honda
Owner (owners.honda.com.). To find information
on
how to retrieve the serial number and obtain
the code, visit radio-navicode.honda.com.
2 Entering the Security Code P. 186
CR-V_KA-31T0A800.book 115 ページ ２０１１年７月４日 月曜日 午後１時５６分