HONDA 2014 Odyssey - Owner's Manual - Manual (Page 477)

uu Replacing Light Bulbs u Headlight Bulbs
476
Main
tenan
ce
1. Remove the clips using a flat-tip
screwdriver, then remove the engine
coolant reservoir out of its stay.
Remove the power steering reservoir from
the stay bracket.
1 High Beam Headlight
Insert a flat-tip screwdriver, lift and remove the
central pin to remove the clip.
Insert the clip with the central pin raised, and push
until it is flat.
Holding clip
Central pin
Push until the
pin is flat.
Clip
Stay Bracket
Passenger side
14 US ODYSSEY-31TK86300.book 476 ページ ２０１３年７月２５日 木曜日 午後４時２３分