Setup mode, Setup screen (main setup), System setup – HONDA 2014 Pilot - Navigation Manual User Manual

Page 90

Advertising
background image

Navigation System

89

SETUP Mode

The SETUP function consists of two

main screens that allow you to change

and update information in the system.

NOTE:

For information on the available voice

commands, see page 167.

SETUP Screen (Main Setup)

Select

Setup from the INFO screen

(

Main info.), and the following screen

will display.

Brightness

The screen brightness has 11 settings.

To change the brightness, use the voice

control system and say “Brightness up”

or “Brightness down.” You can also

select

Brightness and change the

setting by rotating the

Interface Dial

knob.

Tip:

If you are having trouble viewing the

screen in bright lighting conditions, try

increasing the brightness.

Contrast

The screen contrast has 11 settings.

To adjust the contrast, use the voice

control system and say “Contrast up” or

“Contrast down.” You can also select

Contrast and change the setting by

rotating the

Interface Dial knob.

Black Level

The screen black level has 11 settings.

To change the black level, use the voice

control system and say “Black level up”

or “Black level down.” You can also

select

Black Level and change the

setting by rotating the

Interface Dial

knob.

NOTE:

You can have separate daytime and

nighttime settings for Brightness,

Contrast, and Black Level. Adjust each

setting when the display is in either

daytime or nighttime mode. Use the

Display Mode button (page 11 and

111) to select Daytime or Nighttime

mode.

System Setup

Advertising