HONDA 2013 Accord Coupe (EX-L with Navigation) - Technology Reference Guide - Manual (Page 9)

14 15
How It Works
ONE-TOUCH TURN SIGNAL
Use this quick and convenient method to signal a lane change.
• Lightly push the turn signal
lever up or down for a three-
blink sequence.
• For a continuous signal, push
the lever up or down until it
locks into place.
How It Works
AUTO HEADLIGHTS WITH WIPER INTEGRATION
For your convenience, your vehicle’s headlights automatically turn on when you activate
the windshield wipers.
• Make sure your headlights are in the AUTO
position.
• Turn on your windshield wipers. The headlights
also turn on.
• When you turn off the windshield wipers, the
headlights turn off shortly after.
DRIVING POSITION MEMORY SYSTEM (DPMS)
Store driver’s seat positions into memory for each corresponding keyless remote
(1 or 2), which are recalled when you unlock the driver’s door with the remote
and enter the vehicle.
How It Works
3. Press SET. You will hear a beep.
2. Adjust your preferred seat
settings.
4. Press the memory button
corresponding to the remote
(1 or 2) you are using. You will
hear two beeps.
Note: Stored positions can also be recalled by pressing one of the
memory buttons (1 or 2) on the door.
1. Turn on the vehicle. Make sure
the shift lever is in Park (P). For
manual transmission, make sure
the parking brake is applied.
13 Accord 2D TRG_EXL NAVI_ATG_NEW STYLE 8/30/2012 4:09 PM Page 9