HONDA 2013 Accord Sedan - Owner's Manual - Manual (Page 142)

141
uu Operating the Switches Around the Steering Wheel u Brightness Control
Brightness Control
When the parking lights are turned on and the
ignition switch is in ON
( w *1 , you can use the
brightness control knob to adjust instrument
panel brightness.
Brighten: Turn the knob to the right.
Dim: Turn the knob to the left.
You will hear the beeper when the brightness
reaches minimum or maximum. The
information display
* /multi-information
display * will return to its original state several
seconds after you adjust the brightness.
■ Brightness level indicator
The brightness level is shown on the
information display
* /multi-information
display * while you are adjusting it.
1 Brightness Control
Instrument panel brightness varies, depending on
whether the exterior lights are on or off. The
instrument panel dims to reduce glare when they are
on.
Pressing the (Select/Reset) knob switches the
display.
If you turn the knob to the right until the brightness
display is up to max, the beeper sounds. This cancels
the reduced instrument panel brightness when the
parking lights are on.
The brightness can be set differently for when the
exterior lights are on, and when they are off.
Control Knob
On multi-information display
On information display
Home
QRG
Index
2013 Accord Sedan
Co
ntrols
TOC
* Not available on all models *1 : Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.