HONDA 2013 Odyssey (Touring & Touring Elite) - Technology Reference Guide - Manual (Page 12)

20 21
BLUETOOTH ® HANDSFREELINK ® (HFL)
Place and receive phone calls through your vehicle’s audio system. Visit
handsfreelink.honda.com to check if your phone is compatible.
How to Use HFL
Pairing Your Phone
FM Traffic
Press and release the Talk button before you say a command.
Displaying Traffic Information
Say “Display traffic” to view traffic flow and icons.
Occasionally, a green line may appear
indicating free-flow traffic.
Note:Traffic flow and incident icons are
only displayed on map scales of 5 miles
(8 km) or less.
Heavy traffic
Moderate traffic
Traffic
Flow
data
Traffic
Flow
data
Incident
icon
Incident
icon
Incident
Incident Icons:
Congestion
Construction
Road closed
Weather
Provides continuously updated info, including traffic speed, incidents, and
construction in major metro areas. Works in cities where a clear FM traffic signal
is available.
Use this pairing method when no phone has ever been paired to the system. You
can pair your compatible phone only when the vehicle is stopped.
Press and release the Talk button before you say a command.
Pick-Up button: Answer an incoming call, or go
directly to the Phone screen.
Talk button: Give HFL commands.
Back button: Cancel a command and return to
the previous screen.
Hang-Up button: End a call or decline a call.
1. Press the Pick-Up button to
go to the Phone screen. A
prompt appears. Say “Yes.”
2. Make sure your phone is in
discovery mode, and say “OK.”
If your phone does not appear:
Say “Phone Not Found?” and
search for a HandsFreeLink
device from your phone.
Connect to HFL.
4. HFL gives you a four-digit
code. Enter it on your phone
when prompted. The phone is
now paired.
3. HFL searches for your phone.
Say the number next to the
phone when it appears on
the list.
Traffic Rerouting
When a destination is already set, you can create a detour to avoid traffic
incidents or congestion.
1. Say “Display traffic incidents”
to view a list of incidents on
your route.
4. Say “Reroute” to set the new
route.
3. Say “Avoid” and the incident
list returns.
2. Say the number of the
incident you want to avoid.
When the incident appears,
say “Traffic detail.”
13 Odyssey TRG_TOURING_qv9_ATG_NEW STYLE 8/6/2012 1:16 PM Page 12