HONDA 2012 Crosstour - Technology Reference Guide - Manual (Page 6)

REARVIEW CAMERA
How It Works
• When you shift into Reverse (R), a real-time image of the area behind your
vehicle is shown in the navigation display, along with helpful parking guide lines.
• The display turns off when you shift out of Reverse.
For added convenience, the area behind your vehicle is displayed to help you navigate
while backing up.
DRIVING POSITION MEMORY SYSTEM (DPMS) (if equipped)
Store a driver's seat and mirror position into memory for each remote transmitter.
Programming DPMS
Note: A stored memory position is linked to the corresponding keyless remote (1 or 2).
Each item begins to adjust when you unlock the driver’s door with the remote and enter
the vehicle.
1. Turn the ignition switch to ON (II).
Shift into Park (P).
2. Adjust your preferred seat and
outside mirror settings.
3. Press the SET button. You will
hear a beep.
4. Press the memory button
corresponding to the remote
(1 or 2) you are using. You will
hear two beeps.
8 9
Models without navigation Models with navigation
Press and hold the power button for
3 seconds. Repeat to turn back on.
Press and hold CANCEL for 3
seconds. Repeat to turn back on.
Turning the Guide Lines On or Off
Models without navigation Models with navigation
12 Crosstour TRG:ATG_NEW STYLE 6/30/2011 9:44 AM Page 6