Multi-view rear camera, Homelink, Training a button – HONDA 2012 Odyssey (EX-L with Navigation (no RES) ) - Technology Reference Guide User Manual

Page 6: Adjusting the view, Turning the guide lines on or off switching views, How it works

Advertising
background image

9

MULTI-VIEW REAR CAMERA

8

HOMELINK

®

The HomeLink Universal Transceiver can be programmed to operate up to three

remote-controlled devices around your home, such as garage doors, lighting, or home

security systems.

Press and hold the button on the
remote and the HomeLink button at
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2 seconds.

Does the LED blink at a faster rate within 20
seconds?

Press and hold
the HomeLink
button again.

Training

complete

YES

NO

HomeLink indicator
flashes for 2 seconds,
then remains on.

HomeLink LED
remains on.

YES

NO

YES

NO

Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.

1

Press and hold the desired
HomeLink button and the button on
the remote transmitter.

Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?

2

a

The remote has a rolling code.
Press the “learn” button on the
remote-controlled device (e.g.,
garage door opener).

Press the programmed HomeLink
button again; the remote-controlled
device should operate.

Within 30 seconds, press and
hold
the programmed HomeLink
button for 2 seconds.

a

Press and hold the programmed

HomeLink button for about a

second.

Does the device (garage door opener) work?

3

b

4

5

Training a Button

If you have any problems programming HomeLink, see the owner’s manual included

with the device you are trying to program, call HomeLink at (800) 355-3515, or

visit www.homelink.com.

Adjusting the View

Press and hold CANCEL for

about 3 seconds.

Turning the Guide Lines

On or Off

Switching Views

There are three rearview modes: wide,

normal, and top down.
• Press ENTER to toggle between views.
• Rotate the Interface Dial to adjust the

screen brightness.

Normal

Normal

Top down

Top down

Wide

Wide

How It Works

• When you shift into Reverse (R), a real-time image

of the area behind your vehicle is shown in the

navigation display.

•Yellow parking guide lines also appear to help you

judge distance.

• The rearview display turns off when you shift out of

Reverse.

For added convenience, the area behind your vehicle is displayed to help you navigate

while backing up.

12 Odyssey TRG_EXL NAVI:ATG_NEW STYLE

8/24/2011

11:52 AM

Page 6

Advertising