HONDA 2011 CR-Z - Technology Reference Guide - Manual (Page 14)

BLUETOOTH ® HANDSFREELINK ® (if equipped) Place and receive phone calls through your vehicle’s audio system. Visit
handsfreelink.honda.com to check if your phone is Bluetooth-compatible.
Pairing Your Phone
Press and release the HFL Talk button before you give a command.
Making a Call
1. Press the HFL Talk button.
model with navigation shown model with navigation shown
2. Say “Call” or “Dial”and the
desired phone number.
3. Press the HFL Talk button, and
say “Call” or “Dial” to continue.
Receiving a Call
2. Press the HFL Talk button to
accept the call.
3. Press the HFL Back button to
end or decline the call.
4. The call is connected and heard
through the vehicle’s speakers.
1. A notification is heard and
the incoming phone number
appears on the MID.
HFLTalk button: Give HFL
commands or answer incoming calls.
HFL Back button: End a call, go back
to the previous command, or cancel an
operation.
24 25
Press and release the HFL Talk button before you give a command.
1. Enable “Discovery” or
“Search” mode on your
Bluetooth-compatible phone.
2. Say “Phone setup,” then say
“Pair.”
3. HFL gives you a four-digit
code (that also appears on
the MID) and begins to search
for your phone.
4. Search for a Bluetooth
device from your phone, and
connect to HFL.
6. HFL asks you to name the
phone. For example, say
“Mary’s phone.”
5. Enter the four-digit code on
your phone when prompted.
11 CRZ TRG:ATG_NEW STYLE 4/15/2010 10:02 AM Page 14