HONDA 2007 Civic Hybrid - Owner's Manual - Manual (Page 202)

To change the bulb on the driver’s
side, start the engine, turn the
steering wheel all the way to the
right, then turn off the engine. To
change the bulb on the passenger’s
side, turn the steering wheel to the
left.
Remove the electrical connector
from the socket by pushing on the
tab and pulling the connector
down.
Remove the bulb from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Install the new bulb, and turn it
one-quarter turn clockwise to lock
it in place.
Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
Turn on the headlights to test the
new bulb.
Reinstall the inner fender cover.
Then reinstall the holding clips,
and lock them in place by pushing
on their centers.
5.
6.
1.
7.
8.
3.
4.
CONTINUED
Lights
Replacing the Front Side Marker/
Turn Signal Light Bulb
Ma
int
e
na
nce
199
TAB
HOLDING CLIP
SOCKET
BULB
Main Menu Table of Contents s t Main Menu ▲ ▼