HONDA 2007 Ridgeline - Owner's Manual - Manual (Page 206)

Remove the key from the shift
lock release slot, then reinstall the
cover. Make sure the notch on the
cover is on the instrument panel
side. Press the brake pedal, and
restart the engine.
Set the parking brake.
Insert a key into the shift lock
release slot.
If you need to use the shift lock
release, it means your vehicle is
developing a problem. Have it
checked by your dealer.
Make sure the ignition switch is in
the LOCK (0) position.
This allows you to move the shift
lever out of Park if the normal
method of pushing on the brake
pedal and pulling the shift lever does
not work.
Put a cloth on the notch of the
shift lock release slot cover. Using
a small flat-tipped screwdriver or a
metal fingernail file, carefully pry
on the notch of the cover to
remove it.
Push down on the key while you
pull the shift lever towards you
and move it out of Park to neutral.
6.
1.
2.
3.
4.
5.
Shif t Lock Release
Automatic Transmission
202
SHIFT LOCK RELEASE SLOT
COVER
Main Menu Table of Contents