HONDA 2006 Accord Coupe - Owner's Manual - Manual (Page 236)

Open the hood, and remove the
engine oil fill cap. Remove the oil
drain bolt and washer from the
bottom of the engine. Drain the oil
into an appropriate container. Remove the oil filter, and let the
remaining oil drain. A special
wrench (available from your
dealer) is required. Check the oil filter to make sure
its gasket did not stick to the
engine block. A stuck gasket could
cause an oil leak. 4. 3. 2.
Changing the Oil and Filter
234
4-cylinder models
OIL DRAIN BOLT OIL DRAIN BOLT WASHER OIL FILTER
4-cylinder models 6-cylinder models
WASHER
Main Menu Table of Contents