HONDA 2006 Civic GX - Owner's Manual - Manual (Page 26)

Open the trunk. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
Remove the burned out bulb from
the socket by pulling it straight out
of its socket.
Push the new bulb straight into
the socket until it bottoms.
Remove the screw from the center
of each trunk lining fastener, then
remove the fasteners.
Pull the upper edge of the trunk
lining down. 1.
2.
3. 4.
5.
6.
CONTINUED
Lights
Replacing a High-mount Brake
Light Bulb
Maintenance 25
BULB
SOCKET TRUNK LINING
FASTENER
SCREW
Main Menu