HONDA 2005 Civic Hybrid - Owner's Manual - Manual (Page 42)

After properly securing the child
seat (see page
), lift the head
restraint, then route the tether
strap over the seat-back and
through the head restraint legs.
A child seat with a tether can be
installed in any seating position in
the back seat, using one of the
anchorage points shown above.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
Follow steps 2 and 3 from the
previous column.
After properly securing the child
seat (see page
), route the
tether strap over the seat-back.
Tighten the strap according to the
seat maker’s instructions.
Lift the anchor cover, then attach
the tether strap hook to the
anchor, making sure the strap is
not twisted.
1.
2.
1.
3.
2.
38
38
Installing a Child Seat with a
Tether Using an Outer Anchor
Using the Center Anchor
Installing a Child Seat
40
TETHER STRAP
HOOK
Front
Front
TETHER STRAP
HOOK
ANCHORAGE POINT
COVER
ANCHOR
ANCHOR
Main Menu Table of Contents