HONDA 2003 Civic GX - Owner's Manual - Manual (Page 38)

Reinstall the socket. Turn it
clockwise until it locks. Make sure
the new bulb is working.
Reinstall the trunk lining.
Push the new bulb straight into
the socket until it bottoms.
Put the two fasteners into the
holes on the upper part of the
trunk lining. Reinstall the screws.
Remove the screw in the center of
the two fasteners on the upper
part of the trunk lining. Pull the
lining back.
Undo the five fasteners on the
upper part of the trunk lining by
pushing on the center of each
fastener’s head until it pops in.
Open the trunk.
Remove the burned out bulb from
the socket by pulling it straight out
of its socket.
Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
1.
2.
3.
4.
5.
6.
7.
8.
9.
CONTINUED
Replacing a High-mount Brake
Light Bulb
Lights
Maintenance 37
SCREW
BULB
FASTENERS
SOCKET
LINING