HONDA 2002 Civic GX - Owner's Manual - Manual (Page 37)

Open the trunk. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
Reinstall the socket. Turn it
clockwise until it locks. Make sure
the new bulb is working.
Reinstall the trunk lining.
Undo the five fasteners on the
upper part of the trunk lining by
pushing on the center of each
fastener’s head until it pops in.
Remove the burned out bulb from
the socket by pulling it straight out
of its socket.
Push the new bulb straight into
the socket until it bottoms.
Remove the screw in the center of
the two fasteners on the upper
part of the trunk lining. Pull the
lining back.
Put the two fasteners into the
holes on the upper part of the
trunk lining. Reinstall the screws.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Replacing a High-mount Brake
Light Bulb
Lights
Maintenance 36
FASTENERS
01/07/31 16:24:25 31S5W610_037
Main Menu