HONDA 2002 Insight - Owner's Manual - Manual (Page 222)

CONTINUED
Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to: Tighten the two stud fasteners.
Do not catch your clothes or
hands on the hooks on the rear
fender when you replace the
wheel.
To install the rear wheel skirt,
place the skirt against the body.
Line up the slots on the skirt with
the tabs in the body, then push the
skirt upward.
Make sure the wheel skirt is
installed correctly.
Align the marks on the stud
fastener with the marks on the
wheel skirt.
11. 12. 13.
Changing a Flat Tire
Taking Care of the Unexpected 219
T T A A B B
S S L L O O T T
80 lbf·ft (108 N·m , 11 kgf·m)
It is not recommended to drive your car
without the wheel skirts.
It will affect the fuel consumption.
Main Menu Table of Contents