HONDA 2001 Civic Coupe - Owner's Manual - Manual (Page 32)

After selecting a proper child seat,
and a good position to install the seat,
there are three main steps in
installing the seat: Make sure the child is properly
strapped in the child seat
according to the child seat maker’s
instructions. A child who is not
properly secured in a child seat
can be thrown out of the seat in a
crash and be seriously injured.
To provide security during normal
driving maneuvers as well as during
a collision, we recommend that
parents secure a child seat as firmly
as possible.
If the child seat is not secure, try
installing it in a different seating
position, or use a different style of
child seat that can be firmly secured
in the desired seating position.
When you are not using a child seat,
either remove it and store it in a safe
place, or make sure it is properly
secured. An unsecured child seat can
be thrown around the car during a
crash or sudden stop and injure
someone.
However, a child seat does not need
to be ‘‘rock solid.’’ In some vehicles
or seating positions, it may be
difficult to install a child seat so that
it does not move at all. Some side-to-
side or back-and-forth movement can
be expected and should not reduce
the child seat’s effectiveness.
All child seats are
designed to be secured to the car
with the lap part of a lap/shoulder
belt. Some child seats can be
secured to the vehicle’s lower
anchorages instead. A child whose
seat is not properly secured to the
car can be endangered in a crash.
See pages
, and for
instructions on how to properly
secure child seats in this car.
After installing a child
seat, push and pull the seat
forward and from side to side to
verify that it is secure.
31 42 35
Installing a Child Seat Secure the child in the child seat.
Storing a Child Seat
Properly secure the child seat to
the car.
Make sure the child seat is f irmly
secured.
1.
2.
3.
Protecting Children
Driver and Passenger Saf ety 29
Main Menu