ILY FORTRESS CD/DVD Duplicator System - Manual (Page 16)

If Disable is selected, no password will be set and the display will direct back to the
Setup sub-menu.
If Enable is selected, a password must be entered using the following guidelines:
Use i or j to select the character desired.
Press ENT to go to the next position.
There are a total of 6 positions for the password. To enable the password, set all 6 positions.
For space, press ENT without choosing a character to leave the position empty.
Press ESC to cancel the process.
The duplicator will ask for password when “11. Setup” is selected
17. Language: Sets the language selection of the display. Available languages are: English (default),
Spanish, Portuguese, and Japanese.
Î Press
ENT О
О i or j to select language
and press ENT to confirm
18. Clear Setup: Resets the duplicator controller back to factory default settings.
Î Press ENT О
О Press
ENT to confirm О
О О Press ENT to clear all settings
12. Image Manager – This command is for the management of the hard disk drive (HDD) installed in the
duplicator.
Note: This feature is only available on duplicators with a HDD installed. If there is no HDD present in the duplicator,
this feature will NOT show in the menu of commands.
1. Select Image: Allows the selection of the image(s) present on the HDD. The Scroll buttons cycle
through the image(s) on the HDD and the ENT button confirms the selection while the ESC button
cancels the selection. The image(s) are listed in order of which they were loaded.
Î Press
ENT О
О i or j to select image and
press ENT to confirm
2. Disc => Image: Transfers the information from the master CD/DVD to the HDD. After the image(s)
transfer is complete, the reader drive is ejected and the source drive is changed to the HDD.
Î Press
ENT О
О The source disc loaded to
HDD as image file, A001. О
14