Interlogix MC250-4T/1CXT User Manual
Page 8
2 IFS MC250-4T/1CXT User Manual
2400m. The MC250-4T/1CXT (BNC) coax performance is up
to 100/65Mbps for asymmetric data rate within 200m and
31/4Mbps for asymmetric data rate at 2.4km.
The IFS MC250-4T/1CXT Industrial Ethernet Converter is
engineered in a slim metal enclosure that conforms to IP30
standards for deployment in demanding industrial
environments.
The IFS MC250-4T/1CXT provides a lower cost replacement
and smooth migration for existing Long Reach Ethernet (LRE)
networks.
The cable specifications of the connection are listed as
following:
• 10Base-T, Category 3, 4 or 5 UTP
• 100Base-TX, Category 5, 5e or 6 UTP
• Ethernet over VDSL2, Twisted-pair Telephone Wires
• Ethernet over VDSL2 Coaxial Cable
Note:
Slave devices (CPE) must connect to the Master device
(CO) through the telephone wire or coaxial cable. To define
the MC250-4T/1CXT as a Master or Slave, please refer to the
Mode DIP Switch section for more detail.