Interlogix MC251-4P/1CXT - Manual (Page 19)

IFS MC251-4P/1CXT User Manual 15
Mounting Installation
This section describes how to mount the MC251-4P/1CXT and
make connections to it. Please read the following sections and
perform the procedures in the order presented.
Note: In the installation steps below, this Manual uses the IFS
GE-DSGH-8 8 Port Industrial Gigabit Switch as an example.
However, the steps for any IFS Industrial Switch & Industrial
Media Converters are similar.
Mounting to a DIN-Rail
The DIN-Rail kit comes assembled on the MC251-4P/1CXT
out of the box. Please refer to following figures to hang the
MC251-4P/1CXT on a DIN-Rail.
1. Lightly press down and push the bottom of the DIN-Rail
connector mount into the track.