Interlogix MCR300-1T-2S - Manual (Page 13)

- 13 -
2.5.3 Optional DIN-Rail Installation
There are two DIN-Rail holes on the left side of the MCR300-1T-2Sthat allows it can be easily installed with DIN-Rail mounting. The
IFS optional DIN-Rail mounting Kit – RKE-DIN can be order separately. When need to replace the wall mount application with
DIN-Rail application on the MCR300-1T-2S, please refer to following figures to screw the DIN-Rail on the GT-1205A. To hang the
MCR300-1T-2S, follow the below steps:
Step 1: screw the DIN-Rail on the MCR300-1T-2S
Step 2: Lightly press push the DIN-Rail into the track.
1. Never push the converter into the slot with violent, it could damage the chassis.
2. The Media Converter Chassis supports hot-swap; there is no need to turn off the whole
chassis before slide in the new converter.