Interlogix NS3550-24T/4S - Manual (Page 6)

6
Terminal Setup
To configure the system, connect a serial cable to a COM port on a PC or notebook computer and to serial (console) port of the
Managed Switch. The console port of the Managed Switch is DCE already, so that you can connect the console port directly
through PC without the need of Null Modem.
A terminal program is required to make the software connection to the Managed Switch. Windows' Hyper Terminal program may
be a good choice. The Hyper Terminal can be accessed from the Start menu.
1. Click START, then Programs, Accessories and then Hyper Terminal.
2. When the following screen appears, make sure that the COM port should be configured as:
 Baud
: 115200
 Data bits
: 8
 Parity
: None
 Stop bits
: 1
 Flow Control
: None