Resetting to factory default – Interlogix NS3502-8P-2S Installation Guide User Manual
Page 15
Advertising
IFS NS3502-8P-2S Quick Installation Guide 11
7. Resetting to Factory Default
To reset the IP address to the default IP Address “192.168.0.100” or reset the user
name and password to default value( default user name and password are both
admin). Press the hardware reset button at the front panel about 10 seconds.
After the device is rebooted, you can login the management WEB interface within
the same subnet of 192.168.0.xx and default user name / password. Be noted, all
the previous setup with disappeared after factory reset.
Advertising