Interlogix DSGH Series - Manual (Page 12)

Chapter 2: Installation
8 GE-DSG-8 DSGH-5 and 8 Ethernet Switch User Manual
NOTE: This product is intended to be supplied by a UL Listed Direct Plug-In Power
Unit marked "Class 2" or "LPS" and output rated 48 VDC, 380 mA minimum.
Figure 3: Power Inputs
V1- V1 + V2 - V2 +
2. Tighten the wire-clamp screws for preventing the wires from loosing.
Figure 3: Terminal Block
1 2 3 4 5 6
Power 1 Fault Power 2
- + - +
Note: The wire gauge for the terminal block should be in the range between 12 ~ 24
AWG.