Cary Audio Design CPA 1 - Manual (Page 12)

CONTROLS AND DISPLAYS
11
REMOTE CONTROL
This section explains how best to use the remote control to operate the CPA 1.
1. POWER: Use to turn the
power on and off.
2. MUTE: Use to mute the
sound. Press again to
resume sound.
3. VOLUME: Use the buttons
to adjust the volume of the
CPA 1 from Volume 0 to
Volume 63.
4. BALANCE: Use the buttons
to fine-tune the relative
balance of the Left and
Right channel from your
listening position using the
balance buttons in 1 dB
increments.
5. INPUT SELECTOR: Use
the buttons for remote
selection of the various
inputs of the CPA 1.
6. BRIGHT: Use this button to
cycle through four levels of
brightness (including “OFF”) for the display, allowing adjustment for various ambient lighting
conditions.
7. INPUT SOURCE: Input source is selected by pressing their respective buttons.