Interlogix DVR 42 User Manual - Manual (Page 124)

122 TruVision DVR 42 User Manual
1. Click the System Settings icon in the menu toolbar and select Hard Disk .
2. Click the Storage mode tab.
3. Under the Mode option, select Quota .
4. Select a camera whose storage capacity you want to change and enter the
values in GB for maximum record capacity and maximum picture capacity.
The maximum storage capacity of the HDD is listed.
5. Click Apply to save the settings.
6. If you want to copy these values to other cameras, click Copy and select the
cameras. Click OK . Click Apply to save the settings.
Setting up HDD groups
Your DVR can organize multiple HDDs into groups. Videos from specified
channels can be set to be recorded onto a particular HDD group. You could, for
example, save the records from a couple of high priority cameras to one HDD,
and save the recordings from all the other cameras to another HDD.
To set up an HDD group:
1. From the menu toolbar, click System Settings > Hard Disk .
2. Select the Storage Mode tab.
3. Under Mode , select Group .
4. Under Record on HDD Group , select the HDD group number.
5. Check the channels to be added to this group.
Note: By default, all channels belong to HDD Group 1.
6. Click Apply to save the settings.